Easy-flo™ Products


These products are general-purpose silver brazing fluxes. They can be used on the common engineering metals including copper, copper alloys (brass, bronze, nickel silver, copper nickel), nickel alloys, steel, stainless steel and tungsten carbide.

They are available in both paste and powder form and with varying working range, activity and overheat resistance and can be supplied according to Rolls-Royce (MSRR 9500) specification.

Easy-flo™ flux powder has excellent flux pick-up onto warm brazing rod when using the hot rodding technique.

Expand IconEasy-flo™ Flux Powder
 EN1045
 FH10
 Working Range
 550 - 800°C
Easy-flo™ Flux Powder is a globally renowned white silver brazing flux powder. It is a leading brand flux popular with both distributors and end users.
Easy-flo™ Flux Powder is used on most common engineering metals (excluding aluminium). It is an excellent flux pick-up onto warmed brazing rod when using ‘hot-rodding’ technique.
It can be used on stainless steel at <700˚C.Other
MSRR9500/124

Expand IconEasy-flo™ 100 Flux Paste
 EN1045
 FH10
 Working Range
 550 - 800°C
Easy-flo™ 100 Flux Paste is an excellent smooth white general purpose silver brazing flux. It is also sold as Mattiflux™ 100 Flux Paste in certain markets.
It is used on most common engineering metals (excluding aluminium) especially for ferrous materials.

Expand IconEasy-flo™ Low Temperature Grade Flux Paste
 EN1045
 FH10
 Working Range
 550 - 750°C
Easy-flo™ Low Temperature Grade Paste is a thin smooth white paste. It is a general purpose silver brazing flux also marketed as Easy-flo™ Dipping Grade Flux Paste.
It is used on most common engineering metals (excluding aluminium) and on copper and copper alloys.
Easy-flo™ Low Temperature Grade Paste is recommended for induction heating and rapid heating cycles.
Its application is done by dipping of components.
Expand IconEasy-flo™ Medium Temperature Grade Flux Paste
 EN1045
 FH10
 Working Range
 600 - 800°C
This is a white general purpose silver brazing flux paste. It is intended for use with low silver content filler metals and on components where brazing times will be protracted.
Easy-flo™ Medium Temperature Grade Flux Paste is used on most common engineering metals (excluding aluminium) and with lower silver content filler metals.
It performs well with extended heating and at the top of its working range.
Expand IconEasy-flo™ High Temperature Grade Flux Paste
 EN1045
 FH10
 Working Range
 575 - 825°C
Easy-flo™ High Temperature Grade Flux Paste is a silver brazing flux, which performs well with extended heating and at the top of its working range.
It is used on most common engineering metals (excluding aluminium). It has good ‘temperature-time stability’ and overheat resistance.
Easy-flo™ High Temperature Grade Flux Paste is well recommended for vertical hold on components.Other
MSRR9500/136

Expand IconEasy-flo™ Medium Temperature Grade Flux Powder
 EN1045
 FH10
 Working Range
 600 - 800°C
This is a white general purpose silver brazing flux paste. It is intended for use with low silver content filler metals and on components where brazing times will be protracted. This flux conforms to EN1045 FH10.

Expand IconEasy-flo™ Stainless Steel Grade Flux Powder
 EN1045
 FH10
 Working Range
 550 - 775°C
A general purpose silver brazing flux powder, which offers improved fluxing on stainless steel when used with brazing filler metals with a liquidus temperature up to 725˚C.
Easy-flo™ Stainless Steel Grade Flux Powder is recommended where a higher fluoride content boosts activity. It is also suitable for most common engineering metals and on certain aerospace work.Other
MSRR9500/125

Expand IconEasy-flo™ Stainless Steel Grade Flux Paste
 EN1045
 FH10
 Working Range
 550 - 775°C
A general purpose silver brazing flux paste, which offers improved fluxing on stainless steel when used with brazing filler metals with a liquidus temperature up to 725˚C.
Easy-flo™ Stainless Steel Grade Flux Paste is recommended where a higher fluoride content boosts activity. It is also suitable for most common engineering metals and on certain aerospace work.Other
MSRR9500/125

Expand IconEasy-flo™ Aluminium Bronze Grade Flux Paste
 EN1045
 FH11
 Working Range
 550 - 775°C
A specialised silver brazing flux for aluminium bronze and copper alloys with 2-10% aluminium where standard fluxes are unable to dissolve surface aluminium oxide.
Easy-flo™ Aluminium Bronze Grade Flux Paste is recommended for silver brazing of aluminium bronze and copper alloys where the formation of aluminium oxide prevents standard fluxes from working successfully.Other
MSRR9500/121

 
Johnson Matthey & Brandenberger AG - Tel.-Nr. +41 44 307 1930 - Email: gerneral_request@jmmetaljoining.com
We use cookies to help understand how people use our website. By using our site, you agree to our use of cookies. Find out more in our cookies policy.
best replica watches replica watches www.swisspanerai.com Rolex Replica Watches
 
Rolex Replica Watches Omega Replica Watches Replica Tag Heuer Watches Patek Philippe Replica Richard Mille Replica Watches